ECU ISO Code: 08 07 07 04 EF
2014-06-18 17:13:37
CONNECTED TO: 
ALFA 159 2.2 JTS 16V
Bosch Motronic MeD7.6.1 CF4/EOBD Injection (1.9, 2.2)
--------------------------------------------------------------

Kód ISO: 08 07 07 04 EF
Číslo výkresu FIAT: 55205754   
Číslo HW: 0261S01045 
Verze hardwaru: 00
Číslo SW: 1037378597 
Verze softwaru: 0304
Číslo homologace:       
Datum programování: 00/00/0000

READING ERROR CODES:
1: P0011 - Diagnostika polohování vačkového hřídele při výfuku
No help available
The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault. 
2: P0300 - Nedošlo k zážehu (nevíme kde)
Random/Multiple Cylinder Misfire Detected
The reason for this fault is that ECU has received very high signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault. 
3: P0302 - výpadek zážehu na 2. válci
The Emissions Monitoring system has detected misfires, an Air/Fuel mixture problem or other indicators of emissions exceeding the permissible level. Check the plugs, ignition and fuel system, and the engine mechanical condition, and that the oil level is not too high, or oil change overdue. Defects contribute also to O2 sensor degradeation and premature catalytic converter efficiency loss
The reason for this fault is that ECU has received very high signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault. 

